Advancing the effective use of light for society and the environment.

Thursday, April 14, 2005

Industry Group Distributes Guidelines for Reporting LED Life
ASSIST has published recommendations defining and measuring LED life, as a first step toward establishing product standards.
Image: ASSIST recommends document

The Alliance for Solid-State Illumination Systems and Technologies (ASSIST), an LED industry group organized by the Lighting Research Center, has published its recommendations defining and measuring LED life for lighting.

ASSIST recommends: LED Life for General Lighting proposes a definition for the life of LED products for lighting, based on light output depreciation and appropriate light levels for different types of lighting applications. The group recommends 70 percent lumen maintenance (i.e., a 30 percent reduction in light output over time) as the useful life for general lighting applications; and 50 percent lumen maintenance for decorative lighting applications.

Because LEDs rarely fail catastrophically, ASSIST recommends uses the term “useful life” in its life definition. The end of useful life indicates when the light output from the LED product has decreased to a point where it becomes unacceptable for the lighting application.

“The purpose of ASSIST recommends is to help manufacturers present information to end users in a consistent manner,” said N. Narendran, Ph.D., director of research and head of the solid-state lighting program at the LRC. The information and recommendations presented in ASSIST recommends are based upon LED life tests conducted at the LRC and information found in literature regarding noticeable light level changes. In addition, the LRC gathered input from leading LED manufacturers and the traditional lighting community while preparing these recommendations.

The publication also provides methods for measuring and extrapolating data to estimate the life, in hours, of an LED component and an LED-based system, as well as sample data sheets for how companies should record and present life information for their products. Because LED fixture life can vary depending on its packaging, ASSIST recommends calls on both LED component manufacturers and fixture/system manufacturers to test and provide life information for their LED products.

“The LED and lighting industries have not set a standard for LED life at this point,” said Dr. Narendran. “We hope ASSIST’s recommendations will further the current dialogue on this issue and offer a starting point for standards-setting bodies.”

Visit the LRC Web site for a free download of ASSIST recommends: LED Life for General Lighting.

About ASSIST

The Alliance for Solid-State Illumination Systems and Technologies (ASSIST) is a program developed by the Lighting Research Center to advance the effective use of energy-efficient solid-state lighting technologies. ASSIST is a collaboration between researchers, manufacturers, utilities, and government organizations. Its goal is to identify and reduce major technical hurdles and help LED technology gain widespread use in lighting applications that can significantly benefit from this rapidly advancing light source technology. On behalf of ASSIST, the LRC conducts research, demonstration and evaluation, and educational activities. Beyond technical research, ASSIST has been active in fostering discussions between traditional luminaire manufacturers and LED manufacturers. ASSIST sponsors include Boeing, GELcore, New York State Energy Research and Development Authority, Nichia America Corporation, OSRAM SYLVANIA/OSRAM Opto Semiconductors, Philips Lighting, and the U.S. Environmental Protection Agency.

About the LRC

The Lighting Research Center (LRC) is part of Rensselaer Polytechnic Institute and is the leading university-based research center devoted to lighting. Founded in 1988, the Lighting Research Center has built an international reputation as a trusted and reliable source for objective information about lighting technologies, applications, and products. Its mission is to advance the effective use of light and create a positive legacy of change for society and the environment.



2005 Rensselaer Polytechnic Institute, Troy, NY 12180 USA.

Rennselear Polytechnic Institute