Lighting Research Center Lighting Research Center
    Volume 7 Issue 3
May 2003    
beam angle - The angle at which luminous intensity is 50 percent of the maximum intensity. bin - To sort or classify light sources (such as light emitting diodes) into groups according to their luminous intensity or color appearance. conduction - The process of removing heat from an object via physical contact with other objects or materials, usually metals. convection - The process of removing heat from an object through the surrounding air. cosine distribution - A property of a light source such that its luminous intensity in a particular direction is proportional to the cosine of the angle from the normal to the source. driver - For light emitting diodes, a device that regulates the voltage and current powering the source. heat sinking - Adding a material, usually metal, adjacent to an object in order to cool it through conduction. illumination - The process of using light to see objects at a particular location. indication - The process of using a light source as something to be seen as in signaling. junction temperature - For light emitting diodes, the temperature of the light-emitting portion of the device (see PN junction), which is inversely correlated with its light output. lumen maintenance - The lumens produced by a light source at any given time during its operating life as a percentage of its lumens at the beginning of life. monochromatic - For light, consisting of a single wavelength and having a very saturated color. PN junction - For light emitting diodes, the portion of the device where positive and negative charges combine to produce light. pulse-width modulation - Operating a light source by very rapidly (faster than can be detected visually) switching it on and off to achieve intermediate values of average light output; the frequency and the duty cycle (percentage of time the source is switched on) are important parameters in the modulation. semiconductor - A material whose electrical conductivity is between that of a conductor and an insulator; the conductivity of most semiconductors is temperature dependent. spectral power distribution (SPD) - A representation of the radiant power emitted by a light source as a function of wavelength. substrate - For light emitting diodes, the material on which the devices are constructed. tri-phosphor - A mixture of three phosphors to convert ultraviolet radiation to visible light in fluorescent lamps; each of the phosphors emits light that is blue, green or red in appearance with the combination producing white light.
What types of heat sinking materials are used in LED lighting systems?

Any material that can conduct heat away from the LED can serve as a heat sink. Most metals are excellent conductors of heat and therefore many LED manufacturers suggest that mounting materials containing metal frames, fasteners and connectors be used, and that the contact area between the LED and its mounting surface be maximized. It is also important to make a good thermal contact between the LED and its mounting surface.

Recent illumination-grade LEDs contain metal fins and wings to assist in heat sinking as well as large, flat areas suitable for attachment to heat sinks. Even larger heat sinking devices, such as those used in some computer systems, consisting of metal slugs shaped to maximize their surface area, can be incorporated into LED systems containing arrays of LEDs. These could even be integrated into the design of the system to increase attractiveness (Figure 10).

Figure 10. Example of an attractive heat sink for LED lighting systems.

Previous
Previous
2003 Rensselaer Polytechnic Institute. All rights reserved. Next Next


Rensselaer Polytechnic Institute
LRC Intranet Web mail Lighting Research Center