Are LEDs available in different beam distributions?

home | about us | newsroom | publications | search:

Volume 7 Issue 3	May 2003

beam angle - The angle at which luminous intensity is 50 percent of the maximum intensity. bin - To sort or classify light sources (such as light emitting diodes) into groups according to their luminous intensity or color appearance. lumen maintenance - The ability of a lamp to retain its light output over time. Greater lumen maintenance means a lamp will remain brighter longer. The opposite of lumen maintenance is lumen depreciation, which represents the reduction of lumen output over time. Lamp lumen depreciation factor (LLD) is commonly used as a multiplier to the initial lumen rating in illuminance calculations to compensate for the lumen depreciation. The LLD factor is a dimensionless value between 0 and 1. conduction - The process of removing heat from an object via physical contact with other objects or materials, usually metals. convection - The process of removing heat from an object through the surrounding air. cosine distribution - A property of a light source such that its luminous intensity in a particular direction is proportional to the cosine of the angle from the normal to the source. driver - For light emitting diodes, a device that regulates the voltage and current powering the source. heat sinking - Adding a material, usually metal, adjacent to an object in order to cool it through conduction. illumination - The process of using light to see objects at a particular location. indication - The process of using a light source as something to be seen as in signaling. junction temperature - For light emitting diodes, the temperature of the light-emitting portion of the device (see PN junction), which is inversely correlated with its light output. monochromatic - For light, consisting of a single wavelength and having a very saturated color. PN junction - For light emitting diodes, the portion of the device where positive and negative charges combine to produce light. pulse-width modulation - Operating a light source by very rapidly (faster than can be detected visually) switching it on and off to achieve intermediate values of average light output; the frequency and the duty cycle (percentage of time the source is switched on) are important parameters in the modulation. semiconductor - A material whose electrical conductivity is between that of a conductor and an insulator; the conductivity of most semiconductors is temperature dependent. spectral power distribution (SPD) - A representation of the radiant power emitted by a light source as a function of wavelength. substrate - For light emitting diodes, the material on which the devices are constructed. tri-phosphor - A mixture of three phosphors to convert ultraviolet radiation to visible light in fluorescent lamps; each of the phosphors emits light that is blue, green or red in appearance with the combination producing white light.

Yes. Some individual devices are available with near cosine distribution, others have some optical control built into them and spread light in a particular pattern to optimize performance for some applications. Additionally, LED systems can contain optical elements that will further adjust the resulting patterns of light from LEDs for particular applications.